护坡模盒主要是用于防止水土流失,因为现在的雨水比较频繁,像是河流、道路两边需要格外注意,避免被雨水冲塌,这时就需要护坡模盒来进行保护，那么如何才能辨别模具质量的好坏呢！
Slope protection mold box is mainly used to prevent soil erosion, because the current rain is more frequent, such as rivers, roads on both sides of the need to pay special attention to avoid being washed by rain, at this time, we need to protect the slope protection mold box, so how can we identify the quality of the mold!
1、望 观察护坡模盒的颜色，质量好的护坡模盒颜色为纯白色，这样的护坡模盒材质没有添加再生料，模具韧性好、抗变形力强、光洁度高，正常使用可达到200次至300次左右。如果护坡模盒颜色偏黄或偏黑，这说明护坡模盒的材料中掺加了再生料，这样的护坡模盒周转率会很低。
1. If you want to observe the color of the slope protection mold box, the color of the good quality slope protection mold box is pure white. The material of the slope protection mold box is not added with recycled materials. The mold has good toughness, strong deformation resistance and high smoothness. The normal use can reach 200 to 300 times. If the color of the slope protection mold box is yellow or black, it means that the material of the slope protection mold box is mixed with recycled materials, so the turnover rate of the slope protection mold box will be very low.
2、摸 用手去摸一下护坡模盒的厚度，通常模具厚度在3mm左右，模具越厚就越耐用，质量越好。
2. Touch the thickness of the slope protection mold box by hand. Generally, the thickness of the mold is about 3mm. The thicker the mold is, the more durable it is and the better the quality is.
3、量 用量尺测量护坡模具的长、宽、厚及上下口尺寸，模具两面及麻面是有区别的，两面之间需要5毫米左右的稍度，这样的模具才好脱模。
3. The length, width, thickness and upper and lower opening dimensions of the slope protection mould are measured with a measuring ruler. There are differences between the two sides of the mold and the pitted surface. A slight degree of about 5mm is required between the two sides, so that the mold can be demoulded easily.
以上就是护坡模盒好坏辨别方法The above is how to distinguish the quality of the slope protection mold box
